7. Install the:
a. battery
b. base cover
c. microSD card
8. Follow the procedure in After working inside your computer.
Speakers
Removing the speakers
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. microSD card
b. base cover
3. Disconnect the battery cable from the connector on the system board.
4. Disconnect the speaker cable from the connector on the system board [1] and lift the speaker cable off from the cable guide
[2].
5. Unroute the speaker cable from the routing channel [3] along the bottom of the touchpad on the palmrest.
Disassembly and reassembly
43