5. Install the:
a. battery
b. base cover
c. microSD card
6. Follow the procedure in After working inside your computer.
Heat sink
Removing the heat sink
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. microSD card
b. base cover
c. battery
3.
NOTE: Follow the diagonal order to loosen the screws.
Loosen the four captive M2.5x2.5 screws that secure the heat sink to the computer [1].
4. Lift the heat sink away from the computer [2].
Disassembly and reassembly
51
To Next Page
Loading...
