Installing the display hinges
1. Angle the hinges and install the hinges on the LCD back cover [1].
2. Install the six M2.5x3.5 screws to secure the hinges to the LCD back cover [2].
3. Install the:
a. LCD panel
b. display bezel
c. display assembly
d. DC-in cable
e. WLAN card
f. battery
g. base cover
h. microSD card
4. Follow the procedure in After working inside your computer.
eDP cable
Removing the eDP cable
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. microSD card
b. base cover
c. battery
d. WLAN card
70
Disassembly and reassembly
To Next Page
Loading...
