c. display bezel
d. display assembly
e. DC-in cable
f. WLAN card
g. battery
h. base cover
i. microSD card
4. Follow the procedure in After working inside your computer.
Display back cover
1.
NOTE: After disassembling the hinges, you are left with the display back cover which is one complete unit along with
antennae cables.
Follow the procedure in Before working inside your computer.
2. Remove the :
a. microSD card
b. base cover
c. battery
d. WLAN card
e. DC-in cable
f. display assembly
g. LCD bezel
h. LCD panel
i. Display hinges
j. eDP cable
3. Install the display back cover assembly.
4. Install the:
a. eDP cable
b. Display hinges
c. LCD panel
Disassembly and reassembly
73