Table 9. Security (continued)
Option Description
● Allow Non-Admin Password Changes
This option is set by default.
Non-Admin Setup
Changes
Allows you to determine whether changes to the setup options are allowed when an Administrator
Password is set. If disabled, the setup options are locked by the admin password.
● Allow Wireless Switch Changes
This option is not set by default.
UEFI Capsule Firmware
Updates
Allows you to update the system BIOS via UEFI capsule update packages.
● Enable UEFI Capsule Firmware Updates
This option is set by default.
PTT Security
This option lets you control whether the Platform Trust Technology feature (PTT) is visible to the
operating system.
The options are :
● PTT On — Enabled by Default
● Clear
● PPI ByPass for Clear Command
Computrace (R)
Allows you to activate or disable the optional Computrace software.
The options are:
● Deactivate
● Disable
● Activate—Default
CPU XD Support
Allows you to enable or disable the Execute Disable mode of the Processor, operating system
uses this feature to hinder malicious programs that exploits buffer overflow.
● Enable CPU XD Support—Default
Admin Setup Lockout
Allows you to prevent users from entering Setup when an administrator password is set.
● Enable Admin Setup Lockout
This option is not set by default.
Master Password
Lockout
Allows you to disable master password support.
● Enable Master Password Lockout
This option is not set by default.
NOTE: Hard disk password should be cleared before the settings can be changed.
SMM Security
Mitigation
Allows you to enable or disable additional UEFI SMM Security Mitigation protection.
● SMM Security Mitigation
This option is not set by default.
Secure Boot
Table 10. Secure Boot
Option Description
Secure Boot Enable
Allows you to enable or disable the Secure Boot Feature.
System setup 93
To Next Page
Loading...
