Installing the keyboard
1. Connect the keyboard cable to the connector on the computer.
2. Turn the keyboard over and install the keyboard.
3. Tighten the screws to secure the keyboard to the computer.
4. Install the:
a. keyboard trim
b. battery
5. Follow the procedure in After working inside your computer.
Removing the coin cell battery
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. battery
b. base cover
3. To remove the coin cell battery:
a. Disconnect the coin cell battery cable from the system board.
b. Pull the coin cell battery from the adhesive on the system board.
c. Lift the coin cell battery from the system board.
14
To Next Page
Loading...
