a microSD card
b base cover
c battery
3 To remove the memory module:
a Pry apart the memory module latches [1].
b Lift and remove the memory module from the system board [2].
Installing the memory module
1 Insert the memory module into its connector on the system board.
2 Gently push the memory module until the latches snap it into place.
3 Install the:
a battery
b base cover
c microSD card
4 Follow the procedure in After working inside your computer.
Heat sink
Removing heat sink
1 Follow the procedure in Before working inside your computer.
2 Remove the:
Removing and installing components
17
To Next Page
Loading...
