Table 5. System setup options—Boot Configuration menu (continued)
Boot Configuration
Boot Sequence Displays the boot sequence.
Secure Boot
Enable Secure Boot Enable or disable the secure boot feature.
By default, the option is not enabled.
Enable Microsoft UEFI CA Enable or disable the Microsoft UEFI CA boot feature.
By default, the option is enabled.
Secure Boot Mode Enable or disable to change the secure boot mode options.
By default, the Deployed Mode is enabled.
Expert Key Management
Enable Custom Mode Enable or disable custom mode.
By default, the custom mode option is not enabled.
Custom Mode Key Management Select the custom values for expert key management.
Table 6. System setup options—Integrated Devices menu
Integrated Devices
Date/Time Displays the current date in MM/DD/YYYY format and current time in
HH:MM:SS AM/PM format.
Camera Enables or disable the camera.
By default, the Enable Camera option is selected
Audio
Enable Audio Enable or disable the integrated audio controller.
By default, all the options are enabled.
USB Configuration
● Enable or disable booting from USB mass storage devices that are
connected to external USB ports.
By default, the Enable External USB Ports option is enabled.
● Enable or disable booting from USB mass storage devices such as external
hard drive, optical drive, and USB drive.
By default, the Enable USB Boot Support option is enabled.
Disable USB4 PCIE Tunneling Disable the USB4 PCIE Tunneling option.
By default, the option is disabled.
Miscellaneous Devices Enable or disable the Fingerprint reader Device.
By default, the Miscellaneous Devices option is enabled.
Unobtrusive Mode Enable or disable the Unobtrusive Mode. Enabling this option will turn off all
system light and sound.
By default, the Unobtrusive Mode option is disabled.
Table 7. System setup options—Storage menu
Storage
SATA/NVMe Operation
SATA/NVMe Operation Set the operating mode of the integrated storage device controller.
80 BIOS setup
To Next Page
Loading...
