Installing the WLAN Card
1. Insert the WLAN card into its slot.
2. Press down the WLAN card and tighten the screw to secure the WLAN card to the computer.
3. Connect the antenna cables to their respective connectors marked on the WLAN card.
4. Install:
a) access panel
b) battery
5. Follow the procedures in
After Working Inside Your Computer
.
Removing the Palmrest
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Remove:
a) battery
b) SD card
c) access panel
d) keyboard
3. Remove the screws that secure the palmrest to the computer.
20
To Next Page
Loading...
