Figure 29. Installing the speakers
3. Adhere the tapes that secure the speaker cable to the palm-rest and keyboard assembly.
4. Connect the speaker cable to the system board.
5. Connect the fingerprint reader cable (for computers shipped with fingerprint reader), touchpad cable, keyboard cable, and
backlight cable (for computers shipped with keyboard backlight) to the system board.
Next steps
1. Install the battery.
2. Install the base cover.
3. Follow the procedure in After working inside your computer.
Display bezel
Removing the display bezel
CAUTION: The information in this removal section is intended for authorized service technicians only.
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the base cover.
3. Remove the wireless card.
4. Remove the display assembly.
About this task
The following images indicate the location of the display bezel and provide a visual representation of the removal procedure.
Removing and installing Field Replaceable Units (FRUs)
55
To Next Page
Loading...
