Figure 48. Installing the camera module
Steps
1. Align the camera module with the pins on the display back cover.
2. Connect the camera module cable to the connector on the camera module.
3. Adhere the tape that secures the camera cable to the camera.
Next steps
1. Install the display panel.
2. Install the display hinges.
3. Install the display bezel.
4. Install the display assembly.
5. Install the wireless card.
6. Install the base cover.
7. Follow the procedure in After working inside your computer.
Removing and installing Field Replaceable Units (FRUs)
73
To Next Page
Loading...
