Display cable
Removing the display cable
CAUTION: The information in this removal section is intended for authorized service technicians only.
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the base cover.
3. Remove the wireless card.
4. Remove the display assembly.
5. Remove the display bezel.
6. Remove the display hinges.
7. Remove the display panel.
8. Remove the camera module.
About this task
The following images indicate the location of the display cable and provide a visual representation of the removal procedure.
Figure 49. Removing the display cable
Steps
1. Peel the display cable that is adhered to the display back cover.
2. Lift the display cable off the display back cover.
74
Removing and installing Field Replaceable Units (FRUs)
To Next Page
Loading...
