Dell Latitude 3450 - Page 44

About this task
Figure 16. Installing the wireless card
Steps
1. Connect the WLAN-antenna cables to the respective connectors on the wireless card.
NOTE: The WLAN-antenna cable connectors are fragile, and utmost care should be taken while replacing them.
Table 29. WLAN-antenna cable color scheme
Connectors on the wireless card Antenna-cable color
Main - White triangle (△) on the wireless module of the
system board
White cable
Auxiliary - Solid triangle (▲) on the wireless module of the
system board
Black cable
2. Align the notch on the wireless card with the tab on the wireless card slot.
3. Slide the wireless card at an angle into the wireless card slot.
4. Place the wireless-card bracket on the wireless card.
5. Align the screw hole on the wireless-card bracket with the screw hole on the system board.
44
Removing and installing Customer Replaceable Units (CRUs)