Dell Latitude 3450 - Installing the palm-rest and keyboard assembly

About this task
NOTE: The palm-rest assembly cannot be further disassembled once all the pre-removal parts procedures are completed. If
the keyboard is malfunctioning and is required to be replaced, replace the entire palm-rest assembly.
The image below shows the palm-rest assembly after the pre-removal parts procedures have been performed, after performing
the steps mentioned in the prerequisites, you are left with the palm-rest assembly.
Figure 45. Removing the palm-rest and keyboard assembly
Installing the palm-rest and keyboard assembly
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image shows the palm-rest and keyboard assembly.
Removing and installing Field Replaceable Units (FRUs)
77