2
Removing and installing components
This section provides detailed information on how to remove or install the components from your
computer.
Recommended tools
The procedures in this document require the following tools:
• Small flat blade screwdriver
• Phillips #0 screwdriver
• Phillips #1 screwdriver
• Small plastic scribe
Removing the battery
1. Follow the procedure in Before Working Inside Your Computer.
2. To remove the battery:
a. Slide the battery latch to release the battery [1].
b. Pull and lift the battery to remove it from the computer [2].
Installing the battery
1. Insert the battery into the slot until it clicks in place.
2. Follow the procedure in After Working Inside Your computer.
9
To Next Page
Loading...
