Passos seguintes
1. Volte a colocar a bateria
2. Volte a colocar a tampa da base
3. Volte a colocar a placa de memória SD
4. Siga o procedimento indicado em Após efetuar qualquer procedimento no interior do computador
Módulos de memória
Removing the memory module
Prerequisites
1. Follow the procedure in before working inside your computer
2. Remove the SD memory card
3. Remove the base cover
4. Disconnect the battery cable.
Steps
1. Pry the clips securing the memory module until the memory module pops-up [1].
2. Remove the memory module from the memory module slot [2].
Installing the memory module
Steps
1. Align the notch on the memory module with the tab on the memory-module slot.
2. Slide the memory module firmly into the slot at an angle [1].
3. Press the memory module down until the clips secure it [2].
Retirar e instalar componentes
35