Table 1. Latitude 5285 2-in-1 Screw size list (continued)
Component M2.0x 1.1+1.7
M2.0X4.
0
M1.6x3.
0
M2.0X2.5
M1.6x3.
0
M2.0X2.0 M2.0X3.5
Camera module
2 (front)
1(rear)
Antenna module 1
System board 4
Recommended tools
The procedures in this document may require the following tools:
● Phillips screwdriver
○ #0 Phillips head screwdriver
○ #1 Phillips head screwdriver
● Plastic scribe
Deploying the kickstand
1. Hold the tablet vertically on a plane surface.
2. Press the tablet to allow the kickstand to open.
12
Using your tablet
To Next Page
Loading...
