Display Panel and display cable
Removing the display panel and display cable
1. Follow the procedure in Before working inside your tablet.
2. Remove the:
a. uSIM/microSD card
NOTE: uSIM card slot is available only on tablets shipping with WWAN module.
3. Open the kickstand by holding the tablet vertically and pressing it down. Place the tablet with the display facing down.
NOTE: You can also open the kickstand from the speaker recess area.
4. Place the tablet on a flat surface and lift the stand to reveal the base of the tablet.
5. To release the display panel:
a. Remove the M1.6 x 3.0 screws that secure the base cover to the tablet [1].
b. Close the kickstand [2] .
16
Using your tablet
To Next Page
Loading...
