Dell Latitude 5289 - Pcie Solid State Drive (SSD); Removing the Nvme SSD Card; Installing the Nvme SSD

3 Replace the M 2 x 4L screws to secure the battery to the computer.
4 Install the:
a base cover
b SD card
5 Follow the procedure in After working inside your computer.
PCIe Solid State Drive (SSD)
Removing the NVMe SSD card
1 Follow the procedure in Before working inside your computer.
2 Remove:
a MicroSD card
b base cover
c battery
NOTE: You need not remove the battery, instead you can disconnect the battery cable from the system
board.
3 To remove the NVMe SSD card:
a Remove the M2.0 x 3.0 screws that secure SSD thermal bracket [1].
b Lift the thermal plate and slide the thermal bracket from the SSD card [2].
c Lift the SSD card from the slot on the computer [3].
Installing the NVMe SSD
1 Insert the NVMe SSD card into the connector.
2 Install the thermal bracket over the SSD card.
12
Removing and installing components