Removing and installing components
This section provides detailed information on how to remove or install the components from your computer.
Screw size list
Table 1. Latitude 5289 - Screw size list
Component M2.5 x 5 M2.0 x 2 M2.0 x 3 M2.0 x 4L M 2.0 x 1.7 M 2 2.0 x 2.0
Back cover 8 (captive screw)
Battery 4
Heat sink 4
System fan 1 1
WWAN card 1
WLAN card 1
Power connector port 2
EDP bracket 2
Touchpad buttons 2
Fingerprint reader 1
Smart card reader cage 1
LED board 2
Keyboard support plate 13
Keyboard 6
System board 6
SSD bracket 2 (captive
screws)
Recommended tools
The procedures in this document require the following tools:
• Phillips #0 screwdriver
• Phillips #1 screwdriver
• Plastic scribe
Secure Digital (SD) Card
2
8 Removing and installing components
To Next Page
Loading...
