Removing the Secure Digital (SD) Card
1 Follow the procedure in Before working inside your computer.
2 Press in on the Micro SD card to release it from the computer.
3 Slide the Micro SD card out of the computer.
Installing the Secure Digital (SD) Card
1 Slide the Micro SD into the slot until it clicks into place.
2 Follow the procedures in After working inside your computer.
Subscriber Identity Module (SIM) Card
Removing the micro SIM card or micro SIM card tray
CAUTION: Removing the micro SIM card when the computer is on may cause data loss or damage the card. Ensure that your
computer is turned o or the network connections are disabled.
NOTE: Micro SIM card tray is available only for systems that are shipped with WWAN card.
1 Insert a paperclip or a micro SIM card removal tool into the pinhole on the micro SIM card tray.
2 Use a scribe to pull the micro SIM card tray.
3 If a micro SIM card is available, remove the micro SIM card from the micro SIM card tray.
Base cover
Removing the base cover
1 Follow the procedure in Before working inside your computer.
2 Loosen the M2.5 x 5.0 captive screws that secure the base cover to the computer.
Removing and installing components
9
To Next Page
Loading...
