3 Replace the hard drive cable.
4 Replace the screws to secure the hard drive assembly to the system.
5 Connect the hard drive cable to the connector on the system board.
6 Install the :
a battery
b base cover
7 Follow the procedures in After working inside your system.
Coin cell battery
Removing the coin cell battery
1 Follow the procedure in Before working inside your computer.
2 Remove the :
a base cover
b battery
3 To remove the coin cell battery:
a Disconnect the coin cell battery cable from the connector on the system board [1].
b Lift the coin cell battery to release from the adhesive and lift it away from the system board [2].
Removing and installing components
15