a base cover
b battery
c WLAN card
d WWAN card (optional)
e display assembly
3 To remove the display bezel:
a Pry the display bezel at the base of the display [1].
b Lift the display bezel to release it [2].
c Pry the edges on the side of the display to release the display bezel [3, 4].
CAUTION: The adhesive used on the LCD bezel to seal it with the LCD itself, makes it hard to remove the bezel as the
adhesive is very strong and tends to stay stuck to the LCD portion and can peel the layers up or crack the glass when
trying to pry the two items apart.
Installing display bezel - non-touch
1 Place the display bezel on the display assembly.
NOTE
: Remove the protective covering on the adhesive on the LCD bezel before placing on the display assembly.
2 Starting from the top corner, press on the display bezel and work around the entire bezel until it clicks on to the display assembly.
3 Install the:
a display assembly
b WWAN card (optional)
c WLAN card
d battery
e base cover
4 Follow the procedure in After working inside your computer.
Removing and installing components
37
To Next Page
Loading...
