Display panel
Removing display panel - non-touch
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a base cover
b battery
c memory module
d WLAN card
e WWAN card (optional)
f display assembly
g display bezel
3 Remove the 2 (M2*2) screws that secure the display panel to the display assembly [1] and lift to turn over the display panel to access
the display cable [2].
4 To remove the display panel:
a Peel the conductive tape [1].
b Remove the adhesive strip that secures the display cable [2].
c Lift the latch and disconnect the display cable from the connector on the display panel [3] [4].
Removing and installing components
41
To Next Page
Loading...
