Dell Latitude 5290 - Page 44

Installing camera
1 Insert the camera into the slot on the display assembly.
2 Connect the display cable to the connector.
3 Ax the two conductive tape above the camera.
4 Install the:
a display panel
b display bezel
c display assembly
d WLAN card
e WWAN card (optional)
f memory module
g battery
h base cover
5 Follow the procedure in After working inside your computer.
Display (eDP) cable
Removing display cable - non-touch
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a base cover
b battery
c WLAN card
d WWAN card (optional)
e display assembly
f display bezel
g display hinge cover
h display panel
i camera
3 To remove the display cable:
a Slide the display cable and peel the conductive tape from the cable [1].
b Peel the display cable and remove it from the display back cover. [2].
44
Removing and installing components