Option Description
• Primarily AC use
• ACustomdaptive
If Custom Charge is selected, you can also congure Custom Charge Start and Custom Charge Stop.
NOTE:
All charging mode may not be available for all the batteries. To enable this option, disable the
Advanced Battery Charge Conguration option.
Type-C Connector Power
This option lets you set the maximum power that can be drawn from the Type-C connector.
• 7.5 Watts—Default
• 15 Watts
Post behaviour
Table 12. POST Behavior
Option Description
Adapter Warnings
Allows you to enable or disable the system setup (BIOS) warning messages when you use certain power
adapters.
• Enable Adapter Warnings—Default
Keypad (Embedded)
Allows you to choose one of two methods to enable the keypad that is embedded in the internal keyboard.
• Fn Key Only—Default
• By Numlock
NOTE: When setup is running, this option has no eect. Setup works in Fn Key Only
mode.
Numlock Enable
Allows you to enable the Numlock option when the computer boots.
• Enable Numlock—Default
Fn Key Emulation
Allows you to set the option where the Scroll Lock key is used to simulate the Fn key feature.
• Enable Fn Key Emulation
This option is set by default.
Fn Lock Options
Allows you to let hot key combinations <Fn> + <Esc> toggle the primary behavior of F1-F12, between
their standard and secondary functions. If you disable this option, you cannot toggle dynamically the
primary behavior of these keys.
• Fn Lock—Default
Choose any one option:
• Lock Mode Disable/Standard—Default
• Lock Mode Enable/Secondary
Fastboot
Allows you to speed up the boot process by bypassing some of the compatibility steps. The options are:
• Minimal—Default
• Thorough
72 System Setup
To Next Page
Loading...
