Next steps
1. Replace the battery
2. Replace the base cover
3. Replace the SIM card tray
4. Replace the microSD card.
5. Follow the procedure in after working inside your computer.
LED board
Removing the LED board
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the microSD card.
3. Remove the SIM card tray
4. Remove the base cover
5. Remove the battery
Steps
1. Disconnect the LED board cable from the connector on the system board [1].
2. Unroute the LED board cable [2].
48
Removing and installing components
To Next Page
Loading...
