Next steps
1. Replace the speaker.
2. Replace the battery.
3. Replace the base cover.
4. Replace the microSD card.
5. Follow the procedure in after working inside your computer.
System board
Removing the system board
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the microSD card.
3. Remove the base cover.
4. Remove the battery.
5. Remove the speaker.
6. Remove the heatsink.
7. Remove the system fan.
8. Remove the DC-in .
9. Remove the WLAN card.
10. Remove the WWAN card.
11. Remove the Memory modules
12. Remove the SSD
Steps
1. Lift the latch and disconnect the following cables:
a) USH cable [1].
b) LED board cable [2].
c) touchpad cable [3].
60
Disassembly and reassembly
To Next Page
Loading...
