Next steps
1. Install the display assembly (laptop) or display assembly (2-in-1).
2. Install the speakers.
3. Install the smart card reader (optional).
4. Install the power button or power button with optional fingerprint reader.
5. Install the system board.
6. Install the fan.
7. Install the M.2 2280 SSD card or M.2 2230 SSD card.
8. Install the WWAN card (optional).
9. Install the WLAN card.
10. Install the 3-cell battery or 4-cell battery.
11. Install the base cover.
12. Follow the procedure in after working inside your computer.
Display assembly
Removing the display assembly (laptop)
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the base cover.
3. Remove the 3-cell battery or 4-cell battery.
4. Remove the WLAN card.
5. Remove the WWAN card (optional).
About this task
The following images indicate the location of the display assembly and provide a visual representation of the removal procedure.
68
Removing and installing components
To Next Page
Loading...
