Steps
Align the display bezel with the display back-cover and antenna assembly, and gently snap the display bezel into place.
Next steps
1. Install the display assembly.
2. Install the 3-cell battery or 4-cell battery.
3. Install the base cover.
4. Follow the procedure in after working inside your computer.
Display hinges
Removing the display hinges
Prerequisites
NOTE: The display hinge removal procedure is applicable only for Latitude 5330 laptop and not for the 2-in-1 configuration.
1. Follow the procedure in before working inside your computer.
2. Remove the base cover.
3. Remove the 3-cell battery or 4-cell battery.
Removing and installing components
87
To Next Page
Loading...
