Next steps
1. Install the base cover.
2. Install the microSD card.
3. Follow the procedure in After working on your computer.
WLAN-kaart
Removing the WLAN card
Prerequisites
1. Follow the procedure in before working with your computer.
2. Remove the microSD card.
3. Remove the base cover.
Steps
1. Remove the single (M2x3)(M2x3) screw that secures the WLAN card bracket to the system board [1].
2. Remove the WLAN card bracket that secures the WLAN antenna cables [2].
3. Disconnect the WLAN antenna cables from the connectors on the WLAN card [3].
4. Slide and lift the WLAN card away from the connector on the system board [4].
22
Onderdelen verwijderen en plaatsen
To Next Page
Loading...
