Next steps
1. Install the base cover.
2. Install the microSD card.
3. Follow the procedure in After working on your computer.
WWAN-kaart
Removing the WWAN card
Prerequisites
1. Follow the procedure in before working with your computer.
2. Remove the microSD card.
3. Remove the base cover.
4. Remove the battery.
Steps
1. Remove the single (M2x3) screw that secures the WWAN card bracket to the system board [1].
2. Remove the WWAN card bracket that secures the WWAN antenna cables [2].
3. Disconnect the WWAN antenna cables from the connectors on the WWAN card [3].
4. Slide and lift the WWAN card away from the connector on the system board [4].
24
Onderdelen verwijderen en plaatsen
To Next Page
Loading...
