Next steps
1. Install the battery.
2. Install the base cover.
3. Install the microSD card.
4. Follow the procedure in After working on your computer.
Knoopbatterij
Removing the coin-cell battery
Prerequisites
1. Follow the procedure in before working with your computer.
2. Remove the microSD card.
3. Remove the base cover.
4. Remove the battery.
5. Remove the WWAN.
6. Remove the WLAN.
7. Remove the memory module.
8. Remove the DC-in port.
Steps
1. Turn the system board and disconnect the coin cell battery cable from the connector on the system board.
2. Disconnect the coin cell battery cable from the connector on the system board [1].
26
Onderdelen verwijderen en plaatsen
To Next Page
Loading...
