Next steps
1. Install the DC-in.
2. Install the memory module.
3. Install the WLAN.
4. Install the WWAN.
5. Install the battery.
6. Install the base cover.
7. Install the microSD card.
8. Follow the procedure in After working on your computer.
Geheugenmodules
Removing the memory module
Prerequisites
1. Follow the procedure in before working with your computer.
2. Remove the microSD card.
3. Remove the base cover.
4. Remove the battery.
Steps
1. Pry the retention clips securing the memory module until the memory module pops-up [1].
2. Remove the memory module from the memory module slot [2].
28
Onderdelen verwijderen en plaatsen
To Next Page
Loading...
