Next steps
1. Install the battery.
2. Install the base cover.
3. Install the microSD card.
4. Follow the procedure in After working on your computer.
Solid-state schijf
Removing the M.2 SSD
Prerequisites
1. Follow the procedure in before working with your computer.
2. Remove the microSD card.
3. Remove the base cover.
4. Remove the battery.
Steps
1. Remove the two (M2x3) screws that secures the SSD to the palmrest [1].
2. Slightly turn and remove the SSD support bracket from the M.2 SSD slot [2]. Remove the single (M2x2) screw that secures the M.2
SSD to the palmrest [1].
34
Onderdelen verwijderen en plaatsen
To Next Page
Loading...
