Next steps
1. Install the battery.
2. Install the base cover.
3. Install the microSD card.
4. Follow the procedure in After working on your computer.
Beugel van Solid State-schijf
Removing the solid state drive bracket
Prerequisites
1. Follow the procedure in before working with your computer.
2. Remove the microSD card.
3. Remove the base cover.
4. Remove the battery.
Steps
1. Remove the single (M2x3) screw that secures the bracket to the palmrest [1].
2. Lift the SSD bracket of the slot on the palmrest [2].
36
Onderdelen verwijderen en plaatsen