Next steps
1. Install the battery.
2. Install the base cover.
3. Install the microSD card.
4. Follow the procedure in After working on your computer.
Binnenframe
Removing the inner frame
Prerequisites
1. Follow the procedure in before working with your computer.
2. Remove the microSD card.
3. Remove the base cover.
4. Remove the battery.
5. Remove the WWAN.
6. Remove the WLAN.
7. Remove the memory module.
8. Remove the DC-in port.
9. Remove the Coin cell battery.
Steps
1. Unroute the WLAN antenna cables.
38
Onderdelen verwijderen en plaatsen
To Next Page
Loading...
