Next steps
1. Install the Inner frame.
2. Install the coin cell battery.
3. Install the DC-in.
4. Install the memory module.
5. Install the WLAN.
6. Install the WWAN.
7. Install the battery.
8. Install the base cover.
9. Install the microSD card.
10. Follow the procedure in After working on your computer.
Systeemventilator
Removing the system fan
Prerequisites
1. Follow the procedure in before working with your computer.
2. Remove the microSD card.
3. Remove the base cover.
4. Remove the battery.
Onderdelen verwijderen en plaatsen
57
To Next Page
Loading...
