4. Adhere the adhesive tape securing the keyboard and the smartcard board.
Next steps
1. Install the coin cell battery.
2. Install the DC-in.
3. Install the memory module.
4. Install the WLAN.
5. Install the WWAN.
6. Install the battery.
7. Install the base cover.
8. Install the microSD card.
9. Follow the procedure in After working on your computer.
Toetsenbordbracket
Removing the keyboard bracket
Prerequisites
1. Follow the procedure in before working with your computer.
2. Remove the microSD card.
3. Remove the base cover.
4. Remove the battery.
5. Remove the WWAN.
6. Remove the WLAN.
7. Remove the memory module.
8. Remove the DC-in port.
Onderdelen verwijderen en plaatsen
71
To Next Page
Loading...
