2. Insert the camera into the slot on the display back cover .
3. Affix the two conductive tape above the camera [2].
Next steps
1. Install the display assembly.
2. Install the WLAN.
3. Install the WWAN.
4. Install the battery.
5. Install the base cover.
6. Install the Inner frame.
7. Install the microSD card.
8. Follow the procedure in After working on your computer.
Scharnierkappen
Removing hinge caps
Prerequisites
1. Follow the procedure in before working with your computer.
2. Remove the microSD card.
3. Remove the base cover.
4. Remove the battery.
5. Remove the WWAN.
90
Onderdelen verwijderen en plaatsen
To Next Page
Loading...
