6. Remove the WLAN.
7. Remove the display assembly.
8. Remove the Display panel
Steps
1. Remove the two (M2x3) screws that secure the hinge caps to the chassis [1].
2. Pinch the hinge caps to release the hinge caps from the ribs on the display back cover then slide inwards to remove the hinge caps
from the display hinge [2].
Installing hinge caps
Steps
1. Place the hinge caps and slide outward on the display hinges [1].
2. Replace the two (M2x3) screws to secure the hinge caps to the display hinge.
Onderdelen verwijderen en plaatsen
91
To Next Page
Loading...
