Next steps
1. Replace the Display panel
2. Install the display assembly.
3. Install the WLAN.
4. Install the WWAN.
5. Install the battery.
6. Install the base cover.
7. Install the microSD card.
8. Follow the procedure in After working on your computer.
Beeldschermscharnieren
Removing display hinge
Prerequisites
1. Follow the procedure in before working with your computer.
2. Remove the microSD card.
3. Remove the base cover.
4. Remove the battery.
5. Remove the WWAN.
6. Remove the WLAN.
7. Remove the Display assembly.
8. Remove the Display panel.
92
Onderdelen verwijderen en plaatsen
To Next Page
Loading...
