a. Install the Display panel.
b. Install the Dsiplay assembly.
c. Install the WLAN.
d. Install the WWAN.
e. Install the battery.
f. Install the base cover.
g. Install the microSD card.
h. Follow the procedure in After working on your computer.
Beeldschermkabel (eDP)
Removing display cable
Prerequisites
1. Follow the procedure in before working with your computer.
2. Remove the microSD card.
3. Remove the base cover.
4. Remove the battery.
5. Remove the WWAN.
6. Remove the WLAN.
7. Remove the display assembly.
8. Remove the Display bezel.
9. Remove the Display hinge.
10. Remove the Display panel
94
Onderdelen verwijderen en plaatsen