Next steps
1. Install the Camera.
2. Install the Display panel
3. Install the Display hinge
4. Install the display assembly.
5. Install the WLAN.
6. Install the WWAN.
7. Install the battery.
8. Install the base cover.
9. Install the microSD card.
10. Follow the procedure in After working on your computer.
Achterkap van de beeldschermeenheid
Replacing the display back cover
Prerequisites
1. Follow the procedure in before working with your computer.
2. Remove the microSD card.
3. Remove the base cover.
4. Remove the battery.
5. Remove the WWAN.
6. Remove the WLAN.
7. Remove the memory module.
8. Remove the DC-in port.
9. Remove the Coin cell battery.
10. Remove the Inner frame.
96
Onderdelen verwijderen en plaatsen
To Next Page
Loading...
