11. Remove the heatsink.
12. Remove the system fan.
13. Remove the speaker.
14. Remove the LED board.
15. Remove the system board.
16. Remove the keyboard.
17. Remove the power button.
18. Remove the display assembly.
19. Remove theDisplay hinges.
20. Remove the Display panel.
21. Remove the Camera
About this task
After performing the preceding steps, you are left with the display back cover.
Next steps
1. Install the power button.
2. Install the keyboard.
3. Install the system board.
4. Install the LED board.
5. Install the display assembly
6. Install the Inner frame.
7. Install the coin cell battery.
8. Install the DC-in.
9. Install the memory module.
10. Install the WLAN.
11. Install the WWAN.
12. Install the battery.
13. Install the base cover.
Onderdelen verwijderen en plaatsen
97
To Next Page
Loading...
