14. Install the microSD card.
15. Follow the procedure in After working on your computer.
Polssteuneenheid
Replacing the palmrest assembly
Prerequisites
1. Follow the procedure in before working with your computer.
2. Remove the microSD card.
3. Remove the base cover.
4. Remove the battery.
5. Remove the WWAN.
6. Remove the WLAN.
7. Remove the memory module.
8. Remove the DC-in port.
9. Remove the Coin cell battery.
10. Remove the Inner frame.
11. Remove the heatsink.
12. Remove the system fan.
13. Remove the speaker.
14. Remove the LED board.
15. Remove the system board.
16. Remove the keyboard.
17. Remove the power button.
18. Remove the display assembly.
19. Remove the touchpad button board .
About this task
After performing the preceding steps, you are left with the palmrest and keyboard assembly.
98
Onderdelen verwijderen en plaatsen
To Next Page
Loading...
