Next steps
1. Install the LED board.
2. Install the inner frame.
3. Install the WLAN card.
4. Install the WWAN card.
5. Install the 2280 SATA SSD.
6. Install the battery.
7. Install the base cover.
8. Follow the procedure in After working inside your computer.
System board
Removing the system board
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the base cover.
3. Remove the battery.
4. Remove the 2280 SATA SSD.
5. Remove the memory.
6. Remove the WLAN card.
7. Remove the WWAN card.
8. Remove the inner frame.
9. Remove the LED board.
10. Remove the heatsink-discrete or heatsink-UMA.
11. Remove the DC-in.
About this task
The figure indicates the location of the system board and provides a visual representation of the removal procedure.
56
Disassembly and reassembly
To Next Page
Loading...
