Dell Latitude 5401 - Hinge Caps; Removing the Hinge Caps

Hinge caps
Removing the hinge caps
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the base cover.
3. Remove the battery.
4. Remove the display assembly.
5. Remove the display bezel.
About this task
The figure indicates the location of the hinge caps and provides a visual representation of the removal procedure.
Steps
1. Locate the hinge cap on the display back cover.
2. Remove the two (M2x3) screws that secure the hinge caps to the chassis.
3. Pinch the hinge caps to release it from the ribs on the display back cover and then slide inwards to remove the hinge caps from the
display hinge.
76
Disassembly and reassembly