Dell Latitude 5411 - Coin-Cell Battery; Removing the Coin-Cell Battery

Steps
1. Locate the DC-in slot on your computer.
2. Insert the DC-in port into the slot on your computer.
3. Connect the DC-in cable to the connector on the system board.
4. Place the DC-in metal bracket on the DC-in port.
5. Replace the two screws (M2x5) that secure the DC-in metal bracket to the system board.
Next steps
1. Install the heatsink-discrete.
2. Install the battery.
3. Install the base cover.
4. Follow the procedure in After working inside your computer.
Coin-cell battery
Removing the coin-cell battery
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the base cover.
Disassembly and reassembly
39