2. Remove the:
a) Batteries
b) Bottom chassis cover
c) WLAN card
d) WWAN card
e) PCIe Heatsink fan assembly
f) Docking port assembly
3.
NOTE: Depending on the order configuration details the system may have either of the heatsink assembly.
DSC Heatsink
assembly
Unroute the antennae cables from the tabs on the heatsink pipe.
4. Remove the five 'M2.5*5' screws [1] and two 'M1.6*5' [2] screw from the thermal module.
5. Lift and the heat sink assembly from the computer [3].
104
Removing and installing components
To Next Page
Loading...
